Category: Agriculture
So, I see that you are planning to take up beekeeping. Well, you are undertaking a noble occupation. The point is that beekeeping is very important for agriculture on the whole, and not just for honey production. As bees fly about and collect nectar from the flowers to produce honey and for their own food, they also pollinate the flowers which later turn into the fruits and vegetables that we eat. People rarely realize the important role that bees and beekeepers play in agriculture. With this said, beekeeping is also very dangerous and can even be fatal if you do not have the proper protective clothing when you tend your hives. The most important article of protective clothing is the beekeeper hat.
The beekeeper hat is a special hat that is made especially for beekeepers to wear when they tend their hives. The beekeeper hat is usually white in color and has a wide rim around it which spans about six inches outward. The hat also has a veil that drapes down from the rim. The rim is made form some rigid material that can hold the veil. The veil is made from a fine transparent netting that you need to be held away from your face. The veil is to be draped down from the rim and then are tied around the collar of your protective jacket.
Other protective clothing besides the beekeeper hat is also needed to keep the exposed parts of your body from being stung. The face is the most sensitive exposed part of your body, hence this is why how the beekeeper hat is worn is very important. The veil should never touch your face. This can allow for the bees stinger to penetrate the netting and sting you in the face. Furthermore, the bottom of the veil should be snugly tied around the collar of the protective coat to prevent bees from getting up under the veil and stinging you.
The protective coat and pants should all be light colors, preferably white. There is an important reason why protective clothing needs to be white. Dark colors can trigger defensive pheromones in the bees to make them aggressive. This is because most of the bees natural predators, such as bears, are all dark in color, either dark brown or black and furry. If you wear white clothing which is made of smooth material, the bees will not recognize you as a threat as much and therefore will be less aggressive.
The protective clothing should be loosely fitted and worn over other clothing to give you good protective layers of protection from bee stings. Furthermore, all seams of the protective clothing should overlap and snugly be fitted to keep bees from entering in under the clothing through the seems. You should also wash your protective clothing, including the beekeeper hat after tending the hive. You need to understand that as you harvest the honey, the bees will defend it and will at least sting your protective clothing. As the bees sting, the venom released from the stinger is not the only thing that is released from the stinger. As a bee leaves its stinger in your protective clothing, it will also release pheromones that will be on the clothing that will make the other bees be more aggressive when they sense them on your clothing.
The cricket suit can be a great alternative to the beekeeper hat and other protective clothing needed for tending the hives and harvesting the honey. The cricket suit is a rather new invention when it comes to protective clothing for beekeepers and makes it even more difficult for bees to get under the protective clothing through the seems. This suit actually looks like an astronauts suit with a hood and is all white. The hood of the cricket suit serves the same function as the beekeeper hat, but is of a different construction. The hood has a screen in front, allowing you to see what you are doing and has removable plastic rods that hold the hood outward and away from your face, hair, and the back of your head. The plastic rods can be removed from their sleeves simply by opening velcro straps and sliding them out of their sleeves. Then the hood can be washed with the rest of the cricket suit.
Furthermore, you do not need to tie anything with the cricket suit. The hood can be removed, allowed to hang back, or kept over the head by a zipper that fastens it to the collar of the suit. Where the zipper meets the end is sealed with a velcro flat to keep bees from entering through the hole. Furthermore, the rest of the cricket suit is a one-piece suit that is zipped closed in front. This provides for seamless protection from top to bottom. Best of all, you can adjust the cuffs of the wrists and ankles with velcro to make sure that the cuffs are snug and bees cannot get up through the sleeves.
Leather gloves may not necessarily be worn by seasoned veteran beekeepers who already have hands that are immune to the venom of bee stings, as a beginner, you should have them. They protect your hands from being stung when you reach into the hive to harvest the honey.
Whether you get the beekeeper hat or other the cricket suit, you definitely should look into getting good reliable protective clothing to wear while tending your hive. Remember, this protective clothing can save your live. This is especially true if you are allergic to bees. Even for normal people, being stung by a large number of bees can land you in the hospital for a few days, or can even be worse. So, remember, wear protective clothing!
Indian agriculture is the backbone of the country. For efficient farming, Agricultural Implements are very important. Agriculture is not only limited to quality farming but has to satisfy the large market demands because of the immense increase in the population of India. Indian agriculture industry is able to cater to the needs of Indian population owing to the advanced Agricultural Implements. Agricultural Implements have high importance in Indian farming as technology has become an inseparable part of this sector.
Agricultural Implements & Their Uses
The biggest problem in agriculture was the threat of pests. And it was really hard to control pests over vast farmed areas. But with the help of Agricultural Sprayers, pest control has become a short and easy task. And for every specific requirement there is a specific type of Agricultural Sprayer available in the market.
Harvesting was also a time taking process before the introduction of Harvesters. Different types of crops can be very efficiently cut with the use of different hi-tech Harvesters within a short time period.
Weeds always grow around and in the farm land. That is why Weeders of various types are required to keep the growth of weeds at bay. Brush Weed Cutters are widely used Agricultural Implements for the cutting of weeds.
Numerous crops are marketed in shredded form. And shredding of specific crops is best done by implements like Electric Chipper Shredder, Coconut Leaves Shredder, etc.
Tea Harvesting Machine is a special type of Agricultural Implement that is used only for farming tea. With the help of the Tea Harvesting Machine, tea farming has become quite an economic process.
In todays world, agriculture industry cannot do without the help of Advanced Agricultural Implements, if it has to match up with the international standards. Are you looking for a reliable manufacturer of Agricultural Implements? Given below is a one stop solution to your all types of needs of Agriculture Implements.
Based in Tamil Nadu, India, Maax Engineering is a leading Manufacturer, Exporter, Importer and Supplier of Agriculture Instruments .
Olam International, a leading global processor of food ingredients with agricultural projects in Africa, has publicly endorsed the c-e-o water mandate of the u-n global compact. The mandate is a public-private initiative that helps companies develop and implement sustainable water policies and practices. The announcement came as the world observed World Water Week in Stockholm, Sweden.
Olam International said the supply, quality and reliability of water resources are under pressure and the need to adapt to the impact of climate change is increasing.
The signing of the mandate underscores the companys commitment to vigorously and publicly address global water issues regarding agriculture and food supply.
If you reflect that water when you look at it as a hundred per cent value, 97-percent of water would be regarded as salty ocean water, two per cent is actually frozen, so were left with a one per cent marker of water basically for consumption and use in agriculture, explained Chris Brett, Olams head of sustainability, who added, and we split that one per cent, we get to point seven per cent for agriculture, just point three per cent is fresh water for basically human consumption.
Given this he stressed that water is a key issue for them when they see the way people are going to compete for water in the future. As a result the company made a public commitment to use water in more resourceful ways.
Making that commitment is not just a driver for change internally, or a driver for respect in use of water, as a resource, but it is also to communicate to all of our partners how serious we take water on the agenda, said Brett.
He gave an example of success that they were having with irrigation going into their vegetable supply chains in California. The method of irrigation that decreases the use of water is called more crop per drop. It proved to be such a success that it was applied to other Olam operations.
For example we are now undertaking irrigation of rice, and irrigation of coffee plantations in places like Tanzania and Zambia. As a global company we are transferring learning, noted Brett.
The sustainability expert said over the last two years Olam has been measuring its water footprint and communicating that measurement to the public.
He added as a leader in addressing the challenges of water supply, they hope others will follow them in the pursuit of water rationalization and use in agriculture.
Traditionally used in heavy industries to design prototypes and produce thousands of models, vacuum forming machine and molds have become increasingly popular with individuals wanting to produce their own works.
Identification:According to Formech International, a producer of vacuum forming machine, molds can range from simple carved wooden pieces to complicated aluminum forms that can be used to create items such as car dashboards or airline cockpit controls. Materials:Plaster and wood molds are used for low temperature plastics requiring few parts, while jobs requiring higher temperature plastics and industrial production numbers use aluminum based resins or aluminum molds. Realistically, Plastic materials are easy to manufacture and create with few costs. Most plastic products are created by using special molds, which the take the liquid plastic and construct it into the desired shape. One mold is used multiple times, making the process predictable and easy. Plastic are easier to fabricate than metal components and require less energy and time for the process. Workers don’t have to be as skilled as metal workers, which makes it possible to use workers with little experience.
almost anything can be used as a mold so long as it can withstand the temperatures of the plastic being used, according to Professor Ted Selker of the Massachusetts Institute of Technology (see Resources). In the years following the war, Regina’s competitors out-performed them, and Regina experienced dwindling profits. They attempted to broaden their sales base by adding other cleaning products to their repertoire. When that failed to increase profits, an investment group purchased majority interest in Regina.
Process:The process for using a vacuum forming mold is fairly simple. The mold is put in place on the machine first, on an apparatus that can be raised or lowered. A thermoplastic sheet is inserted into the machine and then heated. The mold is raised from below into the hot plastic, and the plastic molds around it. The vacuum then draws all of the air out of the plastic and sets it to the mold’s shape. After setting, air is pumped back in to separate the mold from the plastic. The investment group introduced the Regina Steamer, and the Regina Housekeeper and profits improved. Unfortunately, the investment group experienced management problems, and sold their rights to Regina. In 2000, the Royal Corporation purchased the rights to Regina, but sell the vacuums using the Home Depot brand name.
Types:There are two types of molds used by vacuum forming machine: male (positive) and female (negative). Male form molds project upward toward the plastic sheet, while female forms molds project downward. The top surface of the mold is what comes into contact with the plastic and is therefore better finished, and that is the determinant for using a male or female mold. Benefits:vacuum forming machine can be used in many industries. They are used by companies in the fields of aeronautics, agriculture, automotive, construction, computers, design, electronics, and many more. They are versatile and easy to produce.